Products & Services


PDF Print E-mail
TENSION MEASURMENT / Tension Transducers / Tensioncells / Series 40

 SERIES 40 TENSIONCELL
Comptrol Series 40 Tensioncells are available in eleven capacity ranges for applications with resultant loads (tension plus tare) from 4 to 500 pounds. They are simple to install and operate. They are unusually rugged and versatile, and incorporate a number of exclusive features which eliminate many of the problems associated with strain gage and other types of tension transducers.

Models 40, 41, and 42 are base mounted by means of four bolts. Models P43,
Q43, and R43 require two bolts and are interchangeable with standard pillow block bearings.

Electrical zero adjustment is provided by a Comptrol Tension Indicator or control.

Model C41

Model P43 Tensioncell

Model C41

Model P43

Model C42 Tensioncell

Model 40H Tensioncell

Model C42

Model H40

Standard Features

  • Eleven capacity ranges up to 500 poundsUp to 3 VDC output direct from the transducer
  • Three standard roll support configurations
    • Under Pillow Block (UPB), base mount
    • Low profile C41 features integral side bearing support
    • High Profile C42 with top mounted bearing roll support
    • Models P43, Q43, and R43 with integral bearing support are interchangeable with standard pillow block bearings
  • Mount at any orientation around the axis of the measuring roll
  • 1000% overload protection
  • Feature Comptrol patented LVDT, Viscous Damper, and C-Flexure designs
  • CE Approved