Comptrol Series 30 Tensioncells are available in eleven capacity ranges for applications with resultant loads (tension plus tare) from 4 to 500 pounds. They are simple to install and operate. They are unusually rugged and versatile, and incorporate a number of exclusive features which eliminate many of the problems associated with strain gage and other types of tension transducers.

Series 30 Tensioncells are mounted by means of a single bolt located in line with the axis of the measuring roll. This permits the tensioncell to be rotated to obtain the maximum electrical output signal, under widely varying forces of strip tension and tare weight. Electrical zero adjustment is provided by a Comptrol Tension Indicator or control.

Standard Features:

• Compact 4 cubic inch design

• Four models (Type A, B, C, D) with capacity ranges up to 500 pounds

• Up to 3 volt DC output direct from the transducer, proportional to the applied load.

• 1000% overload protection. Ten times the rated load capacity

• Single-bolt mounting allows tension range to be adjusted over a four to one range

• Integral bearing or bushing to accommodate rotating or non-rotating roll, pulley, or sheave applications

• CE approved