| TENSION MEASURMENT / Tension Transducers / Indicators & Controls |
|
| INDICATORS & CONTROLS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CTI-1000 Analog Tension Indicator
|
|
| STANDARD FEATURES: |
|
| • |
Corrosion resistant stainless steel NEMA 12 rated enclosure |
| • |
Electrical tare adjustment |
| • |
24 volt DC power source for 2 Comptrol tension transducers |
| • |
Isolated 0-10 volt DC output signal, proportional to the applied tension |
| • |
Illuminated power-on switch and LED |
| • |
Filtering, summing, and balancing circuitry |
| • |
3 position switch for monitoring tension or the tension applied to transducers |
| • |
Full scale meter adjustments |
| • |
Customer specified meter scale |
| • |
Three 1/2" conduit knockouts |
|
|
SPECIFICATIONS
|
|
| • |
Power In 120/240 VAC, 1f, 50-60Hz, <1.0 Amp |
| • |
Output (proportional to tension) 0-10 VDC
(Jumper Select) 4-20 mADC |
| • |
Transducer Supply 24 VDC |
| • |
Ambient Temperature 0-40° C |
| • |
Meter Scales Customer Specified (No Charge) |
| • |
Standard Percent Tension (0-100%) |
| • |
Approximate Weight 12 lbs. |
|
|
|
|
|
 |
|
|
|
|
|
|
| The CTI-1200 Digital Tension Indicator |
|
| STANDARD FEATURES: |
|
| • |
Corrosion resistant stainless steel NEMA 12 rated enclosure |
| • |
Electrical tare adjustment |
| • |
24 volt DC power source for 2 Comptrol tension transducers |
| • |
Isolated 0-10 volt DC output signal, proportional to the applied tension |
| • |
Illuminated power-on switch and LED |
| • |
Filtering, summing, and balancing circuitry |
| • |
3 position switch for monitoring tension or the tension applied to transducers |
| • |
Full scale meter adjustments |
| • |
Electrical feedback signal adjustments |
| • |
Three 1/2" conduit knockouts |
|
|
SPECIFICATIONS
|
|
| • |
Power In 120/240 VAC, 1f, 50-60Hz, <1.0 Amp |
| • |
Output (proportional to tension) 0-10 VDC
(Jumper Select) 4-20 mADC |
| • |
Transducer Supply 24 VDC |
| • |
Ambient Temperature 0-40° C |
| • |
Meter Scales Customer Specified (No Charge) |
| • |
Standard Percent Tension (0-100%) |
| • |
Approximate Weight 12 lbs. |
|
|
|
|
|
 |
|
|
|
|
|
|
| CTC-3000 Tension Control |
|
| STANDARD FEATURES: |
|
| • |
Switch selectable 115 or 230 volt AC power |
| • |
Isolated 0-10 volt or 4-20 milliamp DC output |
| • |
Independent calibration adjustments for each Comptrol tension transducer |
| • |
Adjustable pre-sets for Soft-Start, Anti-Coast, Splice, and Web Break settings |
| • |
Outputs for remote tension displays |
| • |
Adjustable PID parameters |
| • |
Plug-in blocks for power supply, output signal, & transducer feedback |
| • |
User display scales with programmable decimal point for tension & output |
|
|
SPECIFICATIONS
|
|
| • |
Power In 120/240 VAC, 1f, 50-60Hz, <1.0 Amp |
| • |
Output (proportional to tension) 0-10 VDC
(Jumper Select) 4-20 mADC |
| • |
Transducer Supply 24 VDC |
| • |
Ambient Temperature 0-40° C |
| • |
Meter Scales Customer Specified (No Charge) |
| • |
Approximate Weight 12 lbs. |
| • |
Enclosure Dimensions 10.25" x 8.25" x 4.25 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
