| TENSION MEASUREMENT / Tension Transducers / Tensioncells |
|
| TENSIONCELLS |
|
|
|
|
|
|
|
|
|
|
| Quick Jump > BRT Series |
|
|
Series 20 Tensioncell
- Thin Profile, only 1-3/8” wide
- Up to 3 VDC output direct from the transducer
- Capacity ranges up to 90 pounds
- 1000% overload protection.
- Side or base mount inside or outside the machine frame
- Thru-hole roll support with a self-aligning bearing or bushing for rotating or non-rotating shaft
- CE Approved
- Made in the U.S.A.
|
|
|
CLICK HERE
For Series 20 Type B Capacity & Dimensions.pdf |
|
|
|
|
|
|
|
CLICK HERE
For Series 20 Sizing & Selection.pdf |
|
|
|
|
|
|
|
CLICK HERE
For Series 20 Type B&C Instruction Manual.pdf
|
|
|
|
|
|
CLICK HERE
For Series 20 Type C Capacity & Dimensions.pdf |
|
|
|
|
|
|
Series 30 Tensioncell
- Compact 4 cubic inch design
- Four models with capacity ranges up to 500 pounds
- Up to 3 volt DC output direct from the transducer,
- 1000% overload protection.
- Single-bolt mounting allows tension range to be adjusted over a four to one range
- Integral bearing or bushing to accommodate rotating or non-rotating roll, pulley, or sheave applications
- CE approved
- Made in the U.S.A.
|
|
|
CLICK HERE
For Series 30 Type A, B, C, D.pdf |
|
|
|
|
|
|
|
CLICK HERE
For Type A30 Capacitiy & Dimensions.pdf |
|
|
|
|
|
|
|
CLICK HERE
For Type B30 Capacitiy & Dimensions.pdf |
|
|
|
|
|
|
|
CLICK HERE
For Type C30 Capacitiy & Dimensions.pdf
|
|
|
|
|
|
|
CLICK HERE
For Model 30 Type A&D Tensioncell
Manual (D-152).pdf
|
|
|
|
|
|
|
CLICK HERE
For Model 30 Type B&C Tensioncell
Manual (F-151).pdf
|
|
|
|
|
|
|
|
|
Series 40 Tensioncell
- Eleven capacity ranges up to 500 pounds
- Up to 3 VDC output direct from the transducer
- Three standard roll support configurations
- Under Pillow Block (UPB) mount H40
- Low profile C41 features integral side bearing support
- High Profile C42 with top mounted bearing roll support
- Models P43, Q43 with integral side bearing support are interchangeable with standard pillow bearings
- 1000% overload protection.
|
|
|
|
|
|
|
|
BRT Series Tensioncell
- Space-saving low profile design
- Up to 3 VDC output direct from the transducer
- Capacity ranges up to 2500 pounds
- Base mount under roll supports any angle around the axis of the measuring roll
- 1000% overload protection.
- CE approved
|
|
|
|
|
|
|
|
|
